This heavy duty Stormtite™ insulated springless service door delivers security, reliability and ease of serviceability and is best suited for applications that require protection against weather extremes. The insulated slats provide climate control as well as sound reduction, while perimeter seals provide additional protection from weather.
Standard max width
up to 20′ (6096 mm) depending on gauge and slat type
Standard max height
up to 20′ (6096 mm) depending on gauge and slat type
Mounting
Interior or exterior face of wall
Control panel
Electronic controller with microprocessor self-diagnostics. Digital readout indicates door action, alarm conditions, and fault conditions. Time delay self-close timer and non-resettable cycle counter is included. One open/close/stop push button station integrated in control panel. Enclosure is IP54 rated (NEMA 3 equivalent).
Curtain
Interlocking roll-formed slats, end locks attached to prevent lateral movement; insulated flat profile type F-265i for doors up to 20’0″ wide — front and back slats 24-gauge galvanized steel. Slat cavity shall be filled with CFC/HCFC-free, foamed-in-place, polyurethane insulation
Curtain finish
Gray, Tan, White or Brown polyester top coat
Bottom bar
Two PowderGuard® Premium powder coated black angles (min. thickness 3/16”) with weatherstrip
Hood
24-gauge galvanized steel primed; motor and end cover provided
Brackets
Min. ¼” hot rolled primed, PowderGuard® Premium powder coated black steel
Insulation
R-value* of 7.71 for energy-efficiency. U-value of .13 and STC rating of 21
Guides
Three structural steel angles PowderGuard® Premium powder coated black; With high cycle UHMW wear strip
Door roll
Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; door does not require counterbalance device
Stormtite™ perimeter seal system
Exterior guide seal, interior hood baffle, bottom astragal
Safety devices
Built-in braking mechanism provides additional peace-of-mind against uncontrolled curtain travel.
Photoelectric safety sensors with guards – provide obstruction monitoring during door operation to help prevent injury and damage
Operation
Direct drive integrated gear/motor/brake assembly; Drive assembly and limit sensors are factory pre-assembled; Hand chain for power outage. Horsepower appropriate to door size/weight; 230 VAC 3-phase motor
Actuator
Single open/close/stop push button station incorporated into control panel
Wind load
20 psf
Warranty
36 month limited warranty coverage on door system
- Motor options: 220/240 VAC 1-phase; 460 and 575 VAC 3-phase
- Flat profile type F-265 for doors up to 20′ wide available in: (Front slat) 22, 20, 18-gauge galvanized steel; 22, 20-gauge stainless steel; 18-gauge aluminum
- Bottom bar also available in galvanized steel, stainless steel and aluminum
- Guide options include galvanized steel, power-coated steel
- Hood available in powder coat, stainless steel and aluminum; sloped hood also available
- Brackets also available in powder coat, galvanized steel
- IP65 (NEMA 4/4X equivalent) control panel
- Sensing edge for improved safety
- Additional set of photoelectric sensors
- Optional push buttons, loop detectors, radio control, motion detectors or any combination thereof available for door operation/control
PowderGuard® Premium powder coat and PowderGuard® Max hardened powder coat available in approximately 200 colors as well as color-matching to specification - PowderGuard® Textured Finish: Industrial textured powder coat provides a thicker, more scratch resistant coat for added product protection on guides, bottom bar and head plate
- Uniformly spaced glazed acrylic vision lites available in 10” x 1”
